Lubrication Oil Pump

Lubricating oil pump is used for the continuous flow of lubrication oil to lubrication points on the machinery like plain bearings, turbines, and engines to cool the lower side of the pistons.

Rafah Technologies Pvt Ltd engaged in supplying the best quality lubrication oil pumps in India at attractive prices. We deliver lubrication oil pump to our customer once thorough testing completed by our professional and experienced engineers.

We are a leading supplier of injection molding components in India. Lubrication oil pump is widely used in the industries like plastic, paper, power and pulp for better operating speed and performance. It removes heat and provides oil immersion lubrication. Click here to contact us…

 Get more detail

Lubrication oil pumps will supply the oil to every lubricating point. E.g., Plain bearings. The gear pump acts as a lubricating pump. The lubricating oil pump takes some oil amount from the reservoir and forces them into the lubricating points. Therefore, the gear pump generates high static pressure in the lubricating oil system and is usually preferred for this purpose. It works under the three-phase power supply.

The capacity of a reservoir tank comprises 3.50L and hence, it works with a pressure of 4MPa. So, then the lubrication system varies according to the requirement and the usages. There are various other Oil Lubrication Pumps like piston pumps used for special purposes in an economy lubrication system.

Purpose of a Lubrication System

There are several purposes of using a system of the lubricating oil pump. Some of them are as follows:

  • For lubricating the bearings and linear guides with oil or liquid greasing.
  • Likewise, it reduces friction, heat, and wear with the mechanical components.
  • The system of lubrication is essential for lubricating all the rotating machinery parts.
  • Hence, it prevents damaging the mechanical components from getting rust by exposed to a moisturized air.
Lubrication Oil Pump Features
  • Voltage: 380V
  • Power: 90W
  • Current: 0.35A
  • Frequency: 50HZ
  • Insulation Level: B
  • Type of grease: No.000
  • The capacity of the reservoir tank cube comprises 3.50L.
  • Working pressure: 4MPa (MPa – MegaPascal)
  • The power rating of the particular motor used in this pumping system is of about 0.12HP
  • The pumping system uses a 3 Phase power supply.
  • Rate of flow: 0.4L/min
  • Speed: 2700r/min
 Get more detail